PRODUCTIVITY AND ECONOMY
• Fuel Efficient Machine Achieved by Total Power Management and Advanced Hydraulic System
- Hydraulic power loss reduced with advanced hydraulic system
- On-demand fan speed and engine output control system
- Equipped with electronically controlled variable speed fans
• Powerful and Economical Engine
Komatsu SAA12V140E-3 Engine with an Output of 713 kW (956 HP) Controlled by Efficient Power Management System
- Auto deceleration and auto idling system
- Two work modes; Power and Economy

ECOLOGY
• EPA Tier 2 Emission Certified Komatsu Engine
• New Technology Produces Remarkably Low Environmental Noise
Dynamic noise of 64.5 dB(A)
- Power module packaging and noise absorbing blades trap noise inside
- Contoured hybrid fan minimizes air turbulence noise

OPERATOR COMFORT
• Newly Designed Mining Shovel Cab Provides Comfortable Operation
- Excellent operational visibility with extended front wind shield and large twin wipers
- Extremely low noise and vibration
Dynamic in-cab noise reduced to the same level as passenger cars
- Rugged OPG top guard integrated into the cab
- Easy-to-see and easy-to-use 7-inch TFT-LCD large monitor
- Comfortable air-suspension seat
- Automatic air conditioner
- Highly pressurized cab
• Bulkhead between Pump Room and Engine
• Engine Stop Devices
• Interconnected Horn and Flashing Light

EASY REPAIR AND MAINTENANCE
Low R&M Cost Sustained by Simplified and Reliable System with Long Service Life
• Simplified and Durable Structure
- Single engine and PTO drive two Komatsu HPV375+375 pumps
- Simplified travel unit with single motor (each side)
- Reinforced track components
- Long life oil and filters
- Extended life of rubber components achieved by lowering hydraulic oil temperature
• Power Module Makes Installation and Removal of Components Easier, and Reduces Overhaul Hours and Cost
• Service Friendly Design
- Maintenance deck surrounding the power module
- Drain ports accessible from ground level
- Concentration of filters
- Large fuel tank enables 24 hours continuous machine operation
- Auto-greasing system, including bucket pins, with 200 liter 52.8 U.S. gal grease tank
• VHMS Monitors the Machine Condition and Minimizes Machine Down Time

ENGINE AND RELATED ITEMS:

• Air cleaner, double element dry (Inside mounted)

• Two cooling fans with fan guard (Hydraulic drive, for radiator and oil cooler)

• Engine, Komatsu SAA12V140E-3

• Fuel pre-filters with water separators

• Corrosion resistors

ELECTRICAL SYSTEM:

• Alternators, 2 x 90 amp, 24V

• Batteries, 140 Ah, 4 x 12V

• Starting motors, 2 x 11 kW

• Working lights, 4 boom, 4 cab base, 3 fuel tank top front, 1 left front and 1 left under cab side catwalk

• Auto decelerator and auto idling system

• AM/FM radio

• Lighted switches on instrument panel

UNDERCARRIAGE:

• 810 mm / 32" double grouser shoes

• 8 track rollers / 3 carrier rollers (each side)

• Hydraulic idler cushion (HIC) with shock absorbing accumulator

• Track guiding guard (Separate type)

GUARDS AND COVERS:

• Dustproof net for radiator and oil cooler

• Pump/engine room partition cover

• Power module under cover

• Travel motor guard

OPERATOR'S CAB:

• Large damper mounted and pressurized mining shovel cab with large tinted windshield, lockable door, large twin wipers and washers, floor mats, cigarette lighter, ashtray and cup holders

• Instrument panel with electronic display/monitor system (7"-TFTLCD), electrically-controlled throttle dial, electric service meter, gauges (coolant temperature, hydraulic oil temp., fuel level, PTO oil temp., engine oil temp.), truck counters, eco-gauge

• Built-in top guard conforming to OPG level 2 (ISO)

• Automatic air conditioners (twin)

• Seat, fully adjustable air suspension with retractable seat belt

• Trainer's seat

• Sun shield

• Fire extinguisher

HYDRAULIC SYSTEM:

• EOLSS (Electric Open Center Load Sensing System)

• 4 variable displacement piston pumps (2 tandem pumps) for work equipment, travel and swing, 2 variable displacement piston pumps (1 tandem pump) for fan drive

• Two axial piston motors for swing with single stage relief valve

• One axial piston motor per track for travel with counterbalance valve

• Four control valves (two integrated valves) for work equipment, swing and travel

• Control levers for work equipment and swing with PPC system

• Control levers and pedals for travel with PPC system

• Oil cooler

• High-pressure in-line oil filters

• Drain-filters for pumps & motors

• Shockless boom control

• Two-mode pressure setting for boom

DRIVE SYSTEM:

• Planetary travel gear with axial piston motor

• Travel parking brake

OTHER STANDARD EQUIPMENT:

• Fully-automatic greasing system with 200 liter 52.8 U.S. gal.

• Manual grease gun for track adjuster

• Fixed emergency escape ladder

• Fully hydraulic ladder

• Fuel tank, 3400 liter 898 U.S. gal.

• Automatic swing holding brake

• Emergency engine stop switch and fuel shut-off lever

• Maintenance light for night

• Step light with timer

• Light in machine cab

• Travel alarm

• Wide catwalk and large handrail

• Interconnected horn and flashing light

• Dual rearview mirrors

• VHMS (with Orbcomm)

• Additional 6 fuses and terminals

• Arms (Backhoe):
-3900 mm 12'10'' arm assembly

• Arms (Loading shovel):
-4450 mm 14'7'' arm assembly

• Booms (Backhoe):
-8700 mm 28'7'' boom assembly

• Booms (Loading shovel):
-5950 mm 19'6'' boom assembly

• HID lamp system

• Rearview monitoring system

• Cab front guard

• PM tune-up service connection

• Track shoe, 1010 mm 40' triple grouser

• Center frame under cover

• Grease refill system (Wiggins)

• Fuel quick charge system (Wiggins)

• Heavy-duty rock bucket

• 55°C / 131°F spec.

• Additional filter system for poor-quality fuel

• Additional pre-cleaner for engine air filter (Enginaire)

• Full length track guiding guards