Komatsu's Closed Center Load Sensing (CLSS) hydraulic system provides quick response and smooth operation to maximize productivity.

New engine and hydraulic pump control technology improves operational efficiency and lowers fuel consumption.

A powerful Komatsu SAA6D107E-2 engine provides a net output of 118 kW / 158 HP. This engine is EPA Tier 4 Interim and EU stage 3B emissions certified.

Komatsu Variable Geometry Turbocharger (KVGT) uses a hydraulic actuator to provide optimum air flow under all speed and load conditions.

Komatsu Diesel Particulate Filter (KDPF) captures 90% of particulate matter and provides automatic regeneration that does not interfere with daily operation.

Large displacement high efficiency pumps provide higher flow output and efficient operation.

Enhanced working modes are designed to match engine speed, pump delivery, and system pressure to the application.

Increased drawbar pull provides improved steering and maneuverability

Large LCD color monitor panel:
■ 7" high resolution screen
■ Provides "Eco-Guidance" for fuel efficient operation
■ Enhanced attachment control

Rearview monitoring system (standard)

Equipment Management Monitoring System (EMMS) continuously monitors machine operation and vital systems to identify machine issues and assist with troubleshooting.

Enhanced working environment
■ High back, heated, and air suspension operator seat
■ Integrated ROPS cab design (ISO 12117-2)
■ Cab meets ISO Level 1 Operator Protective Guard (OPG) top guard (ISO 10262)

Komatsu designed and manufactured components.

Guardrails (standard) located on the machine upper structure provide a convenient work area in front of the engine.

Swing out cooler design provides easy access to service and clean the cooler assembly.

Battery disconnect switch allows a technician to disconnect the power supply before servicing the machine.

Standard 10,406 lb (4720 kg) counterweight provides the same lifting performance as the PC200LC-8 (optional 7,937 lb / 3600 kg counterweight is available).

KOMTRAX equipped machines can send location, SMR and operation maps to a secure website utilizing wireless technology. Machines also relay error codes, cautions, maintenance items, fuel levels, and much more.

■ Alternator, 60 Ampere, 24V

■ AM/FM radio

■ Automatic engine warm-up system

■ Automatic air conditioner/heater

■ Auxiliary input (3.5mm jack)

■ Batteries, large capacity

■ Battery disconnect switch

■ Boom and arm holding valves

■ Converter, (2) x 12V

■ Counterweight, 4720 kg / 10,406 lb

■ Dry type air cleaner, double element

■ Electric horn

■ EMMS monitoring system

■ Engine, Komatsu SAA6D107E-2

■ Engine overheat prevention system

■ Extended work equipment grease interval

■ Fan guard structure

■ Fuel system pre-cleaner 10 micron

■ High back air suspension seat, with heat

■ Hydraulic track adjusters

■ KOMTRAX^® Level 4.0

■ Large LCD color monitor, high resolution

■ Lock lever

■ Mirrors, (LH and RH)

■ Operator Protective Top Guard (OPG), Level 1

■ Pattern change valve (ISO to BH control)

■ Power maximizing system

■ PPC hydraulic control system

■ Pump/engine room partition cover

■ Radiator and oil cooler dustproof net

■ Rear reflectors

■ Rearview monitoring system (1 camera)

■ Revolving frame deck guard

■ Revolving frame undercovers

■ ROPS cab

■ Seat belt, retractable, 76mm / 3"

■ Seat belt indicator

■ Secondary engine shutoff switch

■ Service valve

■ Shoes, triple grouser, 800mm / 31.5"

■ Skylight

■ Slip resistant foot plates

■ Starter motor, 5.5kW/24V x 1

■ Suction fan

■ Thermal and fan guards

■ Track frame undercover

■ Travel alarm

■ Working lights, 2 (boom and RH front)

■ Working mode selection system

(1) additional rearview camera

Arms:

- 2925 mm / 9'7' arm assembly

- 2925 mm / 9'7' HD arm assembly

- 2925 mm / 9'7' HD arm with piping

Booms:

- 5700 mm / 18'8' boom assembly

- 5700 mm / 18'8' HD arm with piping

Cab guards:

- Full front guard, OPG Level 1

- Full front guard, OPG Level 2

- Bolt-on top guard, OPG Level 2

- Lower front window guard

Counterweight, 3600 kg / 7,937 lb

High pressure in-line hydraulic filters

Hydraulic control unit, 1 actuator

Rain visor

Revolving frame undercovers, heavy duty

Shoes, triple grouser, 700 mm / 28"

Sun visor

Straight travel pedal

Track roller guards, full length

Working light, front, one additional

ATTACHMENT OPTIONS

Cab air pre-cleaner

Grade control systems

Hydraulic couplers

Hydraulic kits, field installed

Super long fronts

PSM thumbs

Rockland thumbs

Vandalism protection guards with storage box

Download a Bid Spec spreadsheet