- 43,167 lbs Operating Weight
- 168 @2200 rpm Horsepower
- 4.98 yd³ Blade Capacity
Introducing the Next Generation of Machine Control
Intelligent Machine Control machines have the following advantages over dozers with external grade control systems.
Automated operation from rough dozing to finish grade.
New dozing mode, load control performance features.
Standard factory installed integrated system.
- No Cables
No coiled cables between machine and blade.
- No Climbing
GNSS antenna and mast removed from blade.
- No Connections
No daily connections required between machine and blade.
Automated Blade Control, from Rough Dozing to Finish Grade. Straight to Grade.
- Blade moves to target surface until load reaches a preset level.
- The blade automatically raises to minimize track slip.
- Should the load decrease, blade will lower to re-load blade to an optimum level.
Cab Top GNSS Antenna
No blade mounted GNSS antenna(s), cables to worry about damaging with cab top GNSS antenna. Reduced risk of theft due to low visibility as viewed from ground level.
Comfortable Ride with Heated Operator Seat
The operator seat has adjustable lumbar support, tilt and an electric heater. It is easy to adjust to the operator's shape. Also, the standard seat heat makes it possible to work comfortably in the winter.
Planned maintenance and daily checks are the only way to ensure long service life from equipment. That’s why Komatsu designed the D61EX/PX-24 with conveniently located maintenance points to make necessary inspec-tions and maintenance quick and easy.
Hydraulically-driven swing-up fan
The D61EXi/PXi-24 utilizes a swing-up fan with a gas strut-assisted lift system to provide easy access to the (side-by-side) radiator, oil cooler and charge air cooler. The hydraulic fan has a cleaning mode which can be used for periodic cooler cleaning.
Electronic Controlled Hydraulic System
The electronic controlled, palm commanded joystick provides precise blade control. New blade angling switch operation provides easier and predictable blade control.
The HST control system can reduce fuel consumption.
Heavy-Duty Aftertreatment System
This new system combines a Komatsu Diesel Particulate Filter (KDPF) and Selective Catalytic Reduction (SCR). The SCR NOx reduction system injects the correct amount of DEF at the proper rate, transforming NOx into non-toxic water (H2O) and nitrogen gas (N2).
Heavy-Duty Cooled Exhaust Gas Recirculation (EGR) System
The system recirculates a portion of exhaust gas into the air intake and lowers combustion temperatures, thereby reducing NOx emissions. EGR gas flow has been decreased for Tier 4 Final with the addition of SCR technology. The system achieves a dynamic reduction of NOx, while helping reduce fuel consumption below Tier 4 Interim levels.
Heavy-Duty High-Pressure Common Rail (HPCR) Fuel Injection System
The system is designed to achieve an optimal injection of high-pressure fuel by means of computerized control, providing close-to- complete combustion to reduce PM emissions. The system uses high pressure injection, thereby reducing both PM emissions and fuel consumption over the entire range of engine operating conditions. The Tier 4 Final engine has advanced fuel injection timing for reduced fuel consumption and lower soot levels.
Komatsu Auto Idle Shutdown
Komatsu auto idle shutdown automatically shuts the engine down after idling for a set period of time to reduce unnecessary fuel consumption and exhaust emissions. The amount of time before the engine is shutdown can be easily programmed from 5 to 60 minutes.
Komatsu Variable Geometry Turbocharger (KVGT) system
The KVGT system features proven Komatsu design hydraulic technology for variable control of air-flow and supplies optimal air according to load conditions. It provides better exhaust temperature management. The Tier 4 final version has an improved propeller design for increased performance.
Multi-Monitor with Troubleshooting Function to Minimize Down Time
Various meters, gauges and warning functions are centrally arranged on the multi-monitor. The monitor simplifies start-up inspection and promptly warns the operator with a lamp and buzzer if any abnormalities occur. In addition, countermeasures are indicated in 4 levels to help prevent major machine problems. Replacement times for required PM services are also indicated.
Parallel Link Undercarriage System (PLUS)
Komatsu's new PLUS provides less downtime, plus longer wear with up to 40% lower undercarriage maintenance costs. Rotating bushings eliminate the cost and downtime for bushing turns, and strengthened rollers and links increase wear life up to two times. With PLUS, individual links can be replaced with common track tools.
PAT Dozer with Adjustable Pitch
A power angle power tilt dozer blade with adjustable blade pitch system is available. This blade is available for the D61EXi/PXi-24 machines. The hydraulic blade tilt, angling function (and manually adjustable blade pitch) expand versatility and productivity in a variety of applications.
The low-effort PCCS joystick controls all directional movements, including machine travel speed as well as counter-rotation.
Rear view monitor system
On the large LCD color monitor, the operator can view, through one camera, areas directly behind the machine. This camera can be synchronized with reverse operation.
Selectable Working Mode
P mode is the mode designed for powerful operation and maximum production. E mode is designed for general dozing applications providing adequate speed and power while saving energy. For fuel reduction and energy saving, the monitor panel allows the operator to easily switch the working mode, depending on the work at hand.
P mode (Power mode)
With P mode, the engine outputs its full power, allowing the machine to perform the work requiring large production, heavy-loads and uphill work.
E mode (Economy mode)
With E mode, the engine outputs enough power for the work without delivering unnecessary power. This mode enables energy saving operation and is ideal on hard or rough surfaces that often cause shoe slip and work not requiring as much power, such as downhill dozing, leveling and light-load work.
H mode (high engine idle speed mode)
This setting allows subtle changes in load to be detected, which is tailor-made for power-intensive work. Compared to P mode, the engine high-idle speed is higher in H mode.
Stroke Sensing Hydraulic Cylinders
Robust stroke sensing hydraulic cylinders employ proven Komatsu sensor technologies for accurate finish grade performance. Stroke sensing angle cylinder allows machine control system to know the angle of the blade.
Unrivaled Blade Visibility
The D61EXi/PXi-24 incorporates Komatsu's super-slant nose design. Komatsu's innovative design provides excellent blade visibility for improved machine control and increased efficiency and productivity.
||4-cycle, water-cooled, direct injection|
||Komatsu Variable Geometry Turbocharged, air-to-air aftercooled, cooled EGR|
|Number of cylinders||
|Bore x stroke||107 mm x 124 mm||4.21" x 4.88"|
|Piston displacement||6.69 ltr||408 in³|
||All-speed and mid-range, electronic|
|SAE J1995 - Gross||127 kW||170 HP|
|ISO 9249 / SAE J1349 - Net||125 kW||168 HP|
| Hydraulic fan at maximum speed - Net
|| 113 kW
|Fan drive type||
||Gear pump, force lubricationn|
|*EPA Tier 4 Final emissions certified|
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
|Travel speed (quick shift mode)*||Forward||Reverse|
|Travel speed (variable mode)||0-9.0 km/h
|*Quick shift speeds are adjustable in the monitor.|
In-shoe mounted axial piston type travel motors with integrated two-stage planetary gear reduction. Compact in-shoe mount reduces risk of damage by debris. Bolt-on sprocket for easy displacement.
PCCS joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it backward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation. HST eliminates steering clutches and brakes, providing smooth, powerful turns. Fully electronic control enables smooth operation. The PCCS utilizes shift buttons to increase and decrease speed.
|Minimum turning radius
Oscillating-type with equalizer bar and pivot shafts
Track roller frame
Monocoque, large section, durable construction
Rollers and idlers
Lubricated track rollers
Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is adjusted easily with grease gun.
|Number of track rollers (each side)||
|Type of shoes (standard)||
|Number of shoes (each side)||
|Grouser height||57.5 mm||2.3"|
|Shoe width (standard)||860 mm||34"|
|Ground contact area||54440 cm²||8,438 in²|
(with dozer, ROPS canopy):
|Track gauge||2130 mm||7'0"|
|Length of track on ground||3165 mm||10'4"|
Service Refill Capacities
|Coolant||45 ltr||11.9 U.S. gal|
|Fuel tank||372 ltr||98.3 U.S. gal|
|Engine oil||27 ltr||7.2 U.S. gal|
|Hydraulic tank||101 ltr||26.7 U.S. gal|
|Final drive (each side)||8.1 ltr||2.2 U.S. gal|
||5.4 U.S. gal
Operating Weight (APROXIMATE)
Including ROPS (ISO 3471) cab, C frame for PAT dozer, rated capacity of lubricant, coolant, full fuel tank, operator and standard equipment.
|D61PXi-24||18440 kg||40,653 lb|
Including PAT dozer, ROPS (ISO 3471) cab, operator, standard equipment, rated capacity of lubricant, coolant and full fuel tank.
|D61PXi-24||19580 kg||43,167 lb|
Closed-center Load Sensing System (CLSS) designed for precise
and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 171 ltr/min 45 U.S. gal/min at rated engine rpm.
|Relief valve setting||27.4MPa
||Double-acting, piston type|
|Hydraulic cylinders:||Number of cylinders||Bore|
|Blade lift||2||100 mm 4"|
|Blade tilt||1||120 mm 5"|
|Blade angle||2||110 mm 4"|
|Hydraulic oil capacity (refilling):||
|Power angle tilt dozer||101 ltr||26.7 U.S. gal|
|3-spool control valve for Power Angle Tilt dozer||
||Raise, hold, lower, and float|
||Right, hold, and left|
||Right, hold, and left|
|Additional control valve required for ripper||
||Raise, hold, and lower|
- Air cleaner, double element with dust indicator
- Alternator, 90 ampere/24V
- Backup alarm
- Batteries, 200 Ah/2 x 12V
- Battery disconnect switch
- Blade lift cylinders
- Color monitor, LCD
- Curved exhaust pipe
- Decelerator pedal (single pedal)
- Engine hood
- Engine intake centrifugal precleaner
- Engine, swing open side cover
- Engine shutdown secondary switch
- Front pull hook
- High mount foot rests
- Horn, warning
- Hydraulic driven radiator cooling fan with reverse clean mode
- Hydraulics for rear equipment
- intelligent Machine Control
- Komatsu Diesel Particulate Filter (KDPF)
- Locks, filler caps and covers
- Radiator mask, heavy-duty, swing up
- Radiator reserve tank
- ROPS cab**
- Air conditioner
- Cab accessories
– 12V power supply (2 ports)
– Cup holder
– Rearview mirror
– Rear view monitoring (1 camera)
– AM/FM Radio w/remote AUX plug (3.5 mm)
– 76 dBA
- Work lights
– 3 front, cab mounted
– 2 rear, cab mounted
- Seat, air suspension, fabric, heated low back, headrest
- Seat belt, 76 mm 3", retractable
- Seat belt indicator
- Sealed electrical connectors
- Side-by-side rear mounted cooling package
- Starting motor, 5.5 kW/24V
- Steering system, hydrostatic
- Tie off points standard (ISO 14567)
- Track roller guards, center and end sections
- Track shoe assembly
– Heavy-Duty lubricated rotary bushing (PLUS) track
- 610 mm 24" single grouser shoe (EX)
- 860 mm 34" single grouser shoe (PX)
- Transmission with variable and customizable quickshift
- Transmission, hydrostatic
- Underguards, heavy duty
- Variable Geometry Turbocharger (VGT)
- Water separator
* Dozer assembly and rear mounted equipment are not included in base machine standard equipment
** Cab meets ROPS and FOPS Level 2 standards
- Dozer assembly
- Drawbar, rigid type
- Track roller guard, full length
1757 kg 3,874 lb
- Beam length
2170 mm 7'1"
- Maximum lift above ground
560 mm 1'10"
- Maximum digging depth
665 mm 2'2"