- 48,760 - 51,529 lbs Operating Weight
- 217 @1950 rpm Horsepower
- 5.8 yd³ Blade Capacity
The wide track D65WX-18 has the same great features as the D65 EX and PX machines but marries the standard length track of the EX with the wider track gauge of the PX. The D65WX brings extra stability to applications such as slope work without the need of a low ground pressure track configuration. The D65WX-18 has an optional inside mount power angle tilt blade or the outside mount SIGMADOZER® blade. With the SIGMADOZER® blade, the D65WX-18 machine is the ultimate mass excavation weapon with the largest blade capacity available on the D65 at 7.72 yd3 (5.90 m3).
Air Suspension Seat
New operator seat is equipped with lumbar support, tilting adjust function and electric heater. It is easy to adjust to the operator's shape and various working conditions and provides for comfortable operation. Also standard seat heat makes it possible to work comfortably in the winter.
Auto Idle Shutdown
Komatsu auto idle shutdown automatically shuts the engine down after idling for a set period of time to reduce unnecessary fuel consumption and exhaust emissions. The amount of time before the engine is shutdown can be easily programmed from 5 to 60 minutes.
Automatic shift mode
Select for all general dozing. When a load is applied, the transmission automatically shifts down, and when the load is off, it automatically shifts up to a set maximum gear speed. This mode economizes both fuel and production further when the torque converter lockup mechanism is actuated according to load, providing a one-to-one drive.
Automatic Transmission with Lockup Torque Converter
A significant reduction in fuel consumption and greater power train efficiency are achieved by the automatic transmission and lockup torque converter. The automatic transmission selects the optimal gear range depending on the working conditions and load placed on the machine. This means the machine is always operating at maximum efficiency. The lockup mechanism of the torque converter is automatically actuated to transfer engine power directly to the transmission in travelling and usual dozing speed ranges. Locking up the torque converter results in 10% improved drive train efficiency.
In order to support to optimum operation, the following 5 recommendations are displayed to improve fuel saving operation:
1) Avoid Excessive Engine Idling
2) Use Economy Mode to Save Fuel
3) Avoid Hydraulic Relief Pressure
4) Avoid Overload
5) Use Automatic Shift Mode
The operator can access the ECO guidance menu to check the Operation Records, Eco Guidance Records, and Average Fuel Consumption logs.
Enhanced Transmission Shifting
Select automatic or manual gearshift modes to suit the work at hand, thanks to Tier 4 Final improvements made to the shifting logic. The D65-18 machine now offers faster, smoother shifting in automatic mode. The ability to disable the auto downshift feature from the monitor in the manual shift mode empowers operators who prefer blade load control and shifting from a true manual mode. Operators now have full downshift control from the manual mode.
Hydrostatic Steering System (HSS)—Smooth, Powerful Turning
The engine power is transmitted to both tracks without power interruption on the inside track for smooth, powerful turns. Counter-rotation while in neutral is available for minimum turning radius providing excellent maneuverability.
Based on a completely new digging theory, SIGMADOZER® dramatically improves dozing performance and increases productivity. A new frontal design concept adopted for digging and rolling up at the center of the blade increases soil holding capacity and simultaneously reduces sideway spillage. Reduced digging resistance produces smoother flow of material, enabling the dozing of larger quantities of material with less power. In addition, adoption of a new blade linkage system holds the blade closer to the tractor for improved visibility, enhanced digging force and reduced lateral sway of the blade. This is the next generation of dozer blades.
Integrated ROPS Cab
The D65EX/PX/WX-18 has a strong integrated ROPS cab. High rigidity and superb sealing performance sharply reduce noise and vibration for the operator and helps prevent dust from entering the cab. This provides the operator a comfortable working environment. In addition, side visibility is increased because additional external ROPS structure and posts are not required. Outstanding visibility has been achieved.
Manual shift mode
The mode for dozing and ripping rough ground. When enabled, the transmission automatically shifts down when a high load is encountered, but does not shift up when the load is off. The operator can specify whether the auto shift down function is enabled or disabled in manual gearshift mode by selection in the monitor.
Palm Command Electronic Controlled Travel Control Joystick
Palm command travel joystick provides the operator with a relaxed posture and superb fine control without operator fatigue. Transmission gear shifting is simplified with thumb push buttons.
Power Angle Power Tilt Dozer
A power angle tilt dozer blade with highly durable boxstructure frame is available as an option. This blade is available for the EX, WX and PX machines. The hydraulic tilt and angle function expands versatility and productivity in a variety of applications.
Rear View Monitoring System
On the large LCD color monitor, the operator can view, through one camera, areas directly behind the machine. This camera can be synchronized with reverse operation.
Selectable Working Mode
Working mode P is the mode aiming for powerful operation and maximum production and mode E for general dozing applications with adequate speed and power while saving energy. For CO2 reduction and energy saving, the monitor panel allows for switching the working mode with ease, depending on the work at hand.
P mode (Power mode)
With P mode, the engine outputs its full power, allowing the machine to perform the work requiring large production, heavy-load work, and uphill work.
E mode (Power mode)
With E mode, the engine outputs enough power for the work without delivering unnecessary power. This mode allows for energy saving operation and is suitable for the work on a ground where the machine may cause shoe slip and the work not requiring large power such as downhill dozing, leveling and light-load work.
Standard High Debris Climate Control Package
The D65-18 offers improved heating and cooling performance in high debris applications. A wide core A/C condenser, cab air filter precleaner, and relocated coolant overflow tank are now standard to ensure reliable HVAC performance in high debris applications.
||4-cycle, water-cooled, direct injection|
||Komatsu variable geometry turbocharged, air-to-air aftercooled|
|Number of cylinders||
|Bore x stroke||114 mm x 144.5 mm||4.49" x 5.69"|
|Piston displacement||8.85 ltr||540 in³|
||All-speed and mid-range, electronic|
|SAE J1995 - Gross||164 kW||220 HP|
|ISO 9249 / SAE J1349 - Net||162 kW||217 HP|
|Fan drive type||
||Gear pump, force lubrication|
|*EPA Tier 4 Final emissions certified||
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
Closed-center load sensing system (CLSS) designed for precise
and responsive control, and for efficient simultaneous operation.
Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min 65.5 U.S. gal/min at rated engine rpm.
|Relief valve setting||27.9 MPa / 285 kg/cm²||4,050 psi|
|Spool control valves for SIGMADOZER® or straight tilt dozer||
||Raise, hold, lower, and float|
||Right, hold, and left|
||Raise, hold, and lower|
Service Refill Capacities
|Fuel tank||415 ltr||109.6 U.S. gal|
|DEF tank||23.5 ltr
||6.2 U.S. gal|
|Coolant||49 ltr||12.9 U.S. gal|
|Engine||30.5 ltr||8.1 U.S. gal|
|Torque converter, transmission, bevel gear, and steering system||48 ltr||12.7 U.S. gal|
|Final drive (each side):|
|D65EX-18 non PAT
||16.5 ltr||4.4 U.S. gal|
|D65EX-18 with PAT||22 ltr||5.8 U.S. gal|
|D65PX-18||22 ltr||5.8 U.S. gal|
|D65WX-18||22 ltr||5.8 U.S. gal|
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedalcontrolled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
|Minimum turning radius:||
|D65EX-18 with PAT||6'7"||2.0 m|
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
|Suspension||Oscillating equalizer bar and pivot shaft|
|Track roller frame||Monocoque, large section, durable construction|
|Rollers and idlers||Lubricated|
|Track shoes||Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.|
- Air cleaner, double element with dust indicator
- Alternator, 90 ampere/24V
- Auto idle shutdown function
- Backup alarm
- Batteries, 200 Ah/2 x 12V
- Battery disconnect switch
- Blade lift cylinders
- Color monitor, LCD
- Decelerator pedal
- Engine hood
- Engine intake centrifugal precleaner
- Engine, gull-wing side covers
- Engine shutdown secondary switch
- Front pull hook
- High mount foot rests
- Horn, warning
- Hydraulic driven radiator cooling fan with reverse clean mode
- Hydraulics for rear equipment
- KOMTRAX® Level 5
- Komatsu Diesel Particulate Filter (KDPF)
- Komatsu Variable Geometry Turbocharger (KVGT)
- Locks, filler caps and covers
- Muffler with curved exhaust pipe
- Oil pressure check ports for power train
- Operator ID function
- PM service connector
- Radiator mask, heavy-duty, hinged, perorated
- Radiator reserve tank
- Rear cover
- ROPS cab**
- 75 dB operator ear noise level
- Air conditioner
- Cab accessories
--12V power supply (2 ports)
--Rear view monitoring (1 camera)
--AM/FM Radio w/remote AUX plug (3.5 mm)
- Shovel holder
- Work lights
--2 front, hood mounted
--2 front, cab mounted
--1 rear, left fender mounted
--2 rear, cab mounted
- Seat, air suspension, fabric, heated low back, rotates 12.5° to right, headrest
- Seat belt, 76 mm 3", retractable
- Seat belt indicator
- Sealed electrical connectors
- Secondary engine shutoff switch
- Starting motor, 11.0 kW/24V
- Steering system: Hydrostatic Steering System (HSS)
- Torque converter with auto lock-up
- Track roller guards, center and end sections
- Track shoe assembly
- Heavy-Duty lubricated rotary bushing (PLUS) track
- 560 mm 22" single grouser shoe (EX with PAT)
- 610 mm 24" single grouser shoe (EX with outside mount blade)
- 760 mm 30" single grouser shoe (WX with outside mount blade)
- 760 mm 30" single grouser shoe (PX, WX with PAT)
- 915 mm 36" single grouser shoe (PX with outside mount blade)
- Transmission with auto/manual shift modes
- Underguards, heavy duty
- Hinged belly pan
- Water separator
- Wide core cooling package
* Dozer assembly and rear mounted equipment are not included in base machine standard equipment
** Cab meets OSHA/MSHA ROPS and FOPS Level 2 standards
- Dozer assembly
- Drawbar, long type
- Rear counterweight 850 kg 1,870 lb
- Straight tilt frame for use with allied blades
- Topcon® Plug-N-Play bolt-on finishing kit
- Track roller guard, full length
- 560 mm 22" single grouser HD (EX)
- 760 mm 30" extreme service shoes
- 915 mm 36" extreme service shoes
Multi-shank ripper (for D65EX/WX)
1920 kg 4,230 lb
- Beam length
2170 mm 7'1"
- Maximum lift above ground
640 mm 2'1"
- Maximum digging depth
590 mm 1'11"