• 110,578 - 115,109 lbs Operating Weight
  • 359 @1900 rpm Horsepower
  • 1.25 yd³ Bucket Capacity

PC490LC-10 Super Long Front

The super long front on the PC490LC-10 gives you a huge working range to go along with the power and stability it already provides. The functions and operations are that of the standard excavator but with a wide variety of ditch cleaning and general purpose buckets for dredging, cleaning and sloping applications.

Features

Large Digging Force

The PC490LC-10 Super Long Front is equipped with the Power Max system. This function temporarily increases digging force for 8.5 seconds of operation.

Maximum arm crowd force (ISO):
200 kN (20.4 t) → 214 kN (21.8 t) 7 % UP
(with Power Max.)

Maximum bucket digging force (ISO):
256 kN (26.1 t) → 275 kN (28.0 t) 7 % UP
(with Power Max.)

Efficient Hydraulic System

The PC490LC-10 SLF uses a Closed Center Load Sensing (CLSS) hydraulic system that improves fuel efficiency and provides quick response to the operator's demands. The PC490LC-10 SLF also introduces new technology to enhance the engine and hydraulic pump control. This total control system matches the engine and hydraulics at the most efficient point under any load condition. There have also been improvements in the main valve and hydraulic circuit to reduce hydraulic loss, resulting in higher efficiency and lower fuel consumption.

Large Displacement High Efficiency Pump

Pump displacement has been increased, providing increased flow output as well as operation at the most efficient engine speed.

Idling Caution

To reduce unnecessary fuel consumption, an idling caution is displayed on the monitor if the engine idles for 5 minutes or more.

Working Mode Selection

The PC490LC-10 SLF excavator is equipped with six working modes (P, E, L, B, ATT/P and ATT/E). Each mode is designed to match engine speed, pump flow, and system pressure to the application. The PC490LC-10 SLF features a new mode (ATT/E) which allows operators to run attachments while in Economy mode.

Lifting Mode

When the Lifting mode is selected, the lift capacity is increased 7% by raising the hydraulic pressure.

Eco-Gauge Assists with Energy Saving Operations

The Eco-gauge and new fuel consumption gauge are viewed on the right side of the color monitor and assist the operator in maintaining low fuel consumption and environment friendly operation.

Hydraulic Variable Speed Fan

The electronic control system sets the revolution speed of the cooling fan according to the coolant, hydraulic oil, and ambient temperature; effectively uses the engine output to reduce wasteful fuel consumption; and reduces noise during low-speed fan revolution.

Variable Track Gauge (option)

Lateral stability is significantly increased when operating with the gauge extended (compared to fixed gauge). With track frames retracted, overall width complies with many local transportation regulations.

Two Boom Mode Settings

Smooth boom mode provides easy operation for gathering blasted rock or when scraping down. Power boom mode maximizes digging force for more effective excavating.

Newly Designed Wide Spacious Cab

The newly designed wide spacious cab features a high back, fully adjustable seat with a reclining backrest. The console and seat have an integrated design so that they move together and provide additional comfort for the operator. The new higher capacity operator seat has been enhanced to provide more comfort.

  • Heated
  • Air Suspension
  • Integrated Seat
  • Console Mounted Arm Rests

Large High Resolution LCD Monitor Panel

A new large, user-friendly, high resolution LCD color monitor enables accurate and smooth work. Screen visibility and resolution are further improved compared to the previous LCD monitor panel. The switches and function keys are easy to operate and provide simple navigation through the monitor screens.
Data is displayed in 25 languages to support operators around the world.

Operational "ECO" Guidance

The monitor panel provides operational advice to the operator to help improve machine efficiency and lower fuel consumption. The operator can access the ECO guidance menu to check the Operation Records, Eco Guidance Records, and Average Fuel Consumption Logs.

Improved Attachment Control

The PC490LC-10 SLF is capable of storing up to ten different attachments in the new monitor panel. The name of each attachment can be changed for better tool management. Hydraulic flow rates can be easily adjusted for one-way and two-way flow attachments.

KDPF Regeneration Notification

The LCD color monitor panel provides the operator with the status of the KDPF regeneration, without interfering with daily operation. When the machine initiates active regeneration an icon will appear to notify the operator.

Abnormalities Display with Code

When an abnormality occurs an error code is displayed on the monitor. When an important code is displayed, a caution lamp blinks and warning buzzer sounds to alert the operator to take action. The monitor also stores a record of abnormalities for more effective troubleshooting.

Advanced Monitoring System

The monitor provides advanced monitoring diagnostics to assist with troubleshooting and reduce costly downtime. 

Maintenance Tracking

When the machine approaches or exceeds the oil and filter replacement interval, the monitor panel will display lights to inform the operator.

 

Rear-view Monitoring System (standard)

On the large LCD color monitor the operator can view the image from one camera that will display areas directly behind the machine. An optional 2-camera system is available.

Specifications

Notes:

■ The details in this specification brochure are based on Dash 8 and Dash 10 models as indicated. Some attachments may be installed on prior models but specifications may vary. Contact Young Corporation for details.

■ Variations to the specifications in this brochure can be designed and produced in accordance with customer requirements by contacting Young Corporation with details.

■ SUPER LONG FRONT ATTACHMENTS are designed for “LIGHT DUTY” work only. Excavating work or heavy hoisting may result in side loads and other activities that will damage the machine.

■ Disassembly may be required due to transport restrictions.

■ Illustrations may include optional equipment.

■ Operating weights include additional counterweight when required.

standard

For more information contact your local Komatsu distributor.

optional

For more information contact your local Komatsu distributor.