• 28,604 - 28,660 lbs Operating Weight
  • 97.2 @ 2050 rpm Horsepower
  • 0.34 - 0.78 yd¬≥ Bucket Capacity

PC130-11 Mid-Size Hydraulic Excavator

Powerful and Nimble

Easily transport your machine with Komatsu’s powerful but nimble 97.2 HP conventional tail swing excavator. Thoughtfully designed for customers who want durability, reliability and productivity, the PC130-11 is a smaller, entry-level machine that can handle a wide variety of utility work or small construction jobs – and fit the changing needs of your business as it grows.

Features

Lower fuel consumption

Looking to reduce fuel consumption? This machine uses up to 12% less fuel than the previous model, with six working modes to help you optimize productivity and fuel efficiency.

Light-weight and powerful

Thoughtfully designed to be under 29,000 lbs., the PC130-11 is nimble and can easily handle a wide variety of utility work or small construction jobs, providing a versatile workhorse for you as your business expands and grows.

Auto-idle shut down

Limit unnecessary fuel consumption with Komatsu’s auto-idle shut down feature that can be set to automatically stop the engine after a preset amount of idle time.

Steel castings

Durable steel castings in the boom foot, boom nose and arm tip help spread working loads away from high stress areas providing improved long-term durability.

Optimal hydraulic flow

High arm and bucket digging forces to optimize overall performance.

One-piece rear opening hood

A large one-piece hood, ground level grease points, engine oil and fuel filters provide quick and easy service access.

Specification

Engine

Model
Komatsu SAA4D95LE-7*
Type
Water-cooled, 4-cycle, direct injection
Aspiration
Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders
4
Bore 95 mm 3.74"
Stroke 115 mm 4.53"
Piston displacement 3.26 ltr 199 in³
Horsepower:

Horsepower:
   
    SAE J1995 / Gross 72.6 kW 97.3 HP
    ISO 9249 / SAE J1349 / Net 72.5kW 97.2 HP
    Rated rpm
2050
    Fan at maximum speed /Net 67.8 kW 90.9 HP
    Fan drive method for radiator cooling
Mechanical with viscous clutch
Governor   All-speed control, electronic

*EPA Tier 4 Final emissions certified


Hydraulics

Type ................HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valve

Number of selectable working modes
6
Main pump:    
     Type
Variable capacity piston type
     Pumps for
Boom, arm, bucket, swing, and travel circuits
     Maximum flow 242 ltr/min 64 U.S. gal/min
Hydraulic motors:
   
     Travel
2 x piston motor with parking brake
     Swing
1 x piston motor with swing holding brake
Relief valve setting:
   
     Implement circuits 34.8 MPa / 355 kgf/cm2 5,050 psi
     Travel circuit
34.8 MPa / 355 kgf/cm2 5,050 psi
     Swing circuits 29.2 MPa / 298 kgf/cm² 4,240 psi
     Pilot circuit 3.2 MPa / 33 kgf/cm² 470 psi
Maximum Auxiliary Flow
at 250 kgf/cm2 3,553 psi*
242 ltr/min 64 U.S. gal/min
Hydraulic cylinders/Number of cylinders:
bore x stroke x rod diameter bore x stroke x rod diameter
    Boom / 2 105 mm x 1055 mm x 70 mm 4.1" x 41.5" x 2.76"
    Arm / 1 110 mm x 1175 mm x 75 mm 4.3" x 46.3" x 2.95"
    Bucket / 1 95 mm x 885 mm x 65 mm 3.7" x 34.8" x 2.56"

Drives and Brakes

Steering control
Two levers with pedals
Drive method
Fully hydrostatic
Maximum drawbar pull 123 kN 12,500 kgf
27,560 lbf
Gradeability
70%, 35°
Maximum travel speed:
   
    High 5.5 km/h 3.4 mph
    Low 2.9 km/h 1.8 mph
Service brake
Hydraulic lock
Parking brake
Wet, multiple-disc

Swing System

Driven by Hydraulic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake
Hydraulic lock
Swing lock Wet, multiple-disc brake
Swing speed 11.0 rpm
Swing torque 2991 kg.m 21,627 ft lbs

Undercarriage

Center frame X-leg frame
Track frame Box-section
Track type Sealed track
Track adjuster Hydraulic
Number of shoes 43 each side
Number of carrier rollers 1 each side
Number of track rollers 7 each side

Sound Performance

Exterior – ISO 6395 101 dB(A)
Operator – ISO 6396 71 dB(A)

Coolant and Lubricant Capacity refilling

Fuel tank 250 ltr 66 U.S. gal
Coolant 17.7 ltr 4.6 U.S. gal
Engine 11.5 ltr 3.0 U.S. gal
Final drive, each side 2.1 ltr 0.55 U.S. gal
Swing drive 2.5 ltr 0.7 U.S. gal
Hydraulic tank 69 ltr 18.2 U.S. gal
DEF tank 21.1 ltr 5.6 U.S. gal

Operating Weight

Operating weight includes 4600 mm 15'1" one-piece boom, 2500 mm 8'2" arm, SAE heaped 0.51 m3 0.67 yd3 backhoe bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.

Grouser Operating Weight Ground Pressure
ISO 16754
500 mm
20" Road Liner
12730 kg
28,064 lb
39.8 kPa / 0.40 kg/cm2
5.77 psi
600 mm
24" Triple
12800 kg
28,219 lb
33.3 kPa / 0.34 kg/cm2
4.83 psi
700 mm
28" Triple
13000 kg
28,660 lb
29 kPa / 0.29 kg/cm2
4.20 psi

Standard

ENGINE

  • Air cleaner, double element with auto dust evacuator
  • Cooling fan, viscous type
  • Debris guards for radiator and oil cooler
  • Engine, Komatsu SAA4D95LE-7
  • Engine overheat prevention system 

ELECTRICAL SYSTEM

  • Alternator, 24 V/60 A
  • Auto-decelerator
  • Batteries, 2 x 12 V/92 Ah
  • Electric horn
  • Starting motor 24 V/4.5 kW
  • Working light on boom

HYDRAULIC SYSTEM

  • Boom holding valve

GUARDS AND COVERS

  • Fan guard structure
  • Handrails
  • Pump/engine partition cover

UNDERCARRIAGE

  • Shoe, 600 mm 24" triple grouser

OPERATOR ENVIRONMENT

  • 2 x 12 V power points
  • 2 way multi-control valve
  • 24 V - 12 V power converter
  • Automatic A/C
  • Auto idle shutdown function
  • Auxiliary input jack
  • Cab includes: antenna, AM/FM radio, floor mat, intermittent front windshield wiper and washer, large ceiling hatch, pull-up front window, removable lower windshield
  • Foldable mirror (LH)
  • Large high resolution LCD monitor
  • Lock lever
  • Mirror (Rear)
  • Operator identification function
  • Operator protective top guard, OPG level 1 (ISO 10262)
  • Rear view monitor system
  • ROPS cab (ISO 12117-2)
  • Seat belt, 76 mm 3"
  • Suspension seat
  • Swing holding brake

OTHER

  • Counterweight (total mass), 1850 kg 4,078 lb
  • Equipment management monitoring system
  • KOMTRAX®
  • Pattern change valve
  • Rear reflector
  • Travel alarm

Optional

HYDRAULIC SYSTEM

  • Hydraulic control unit - 1 additional actuator (+ 1 Hydraulics) with one and two-way flow

GUARDS AND COVERS

  • Cab guard
    — Full front guard, OPG level 1 (ISO 10262)
    — Full front guard, OPG level 2 (ISO 10262)
    — Bolt-on top guard, OPG level 2 (ISO 10262)

UNDERCARRIAGE

  • Shoes
    — 700 mm 28" triple grouser
    — 500 mm 20" rubber roadliner

OPERATOR ENVIRONMENT

  • Sunvisor
  • KomVision surrond camera system

WORK EQUIPMENT

  • Arms
    — 2500 mm 8'2" arm assembly
    — 2500 mm 8'2" arm assembly with piping 
  • Booms
    — 4600 mm 15'1" boom assembly
    — 4600 mm 15'1" boom assembly with piping