• 51,397 - 53,882 lbs Operating Weight
  • 165 @ 2000 rpm Horsepower
  • 0.66 - 1.57 yd³ Bucket Capacity

PC210LC-11

Performance & Fuel Economy

New engine with up to 4% more horsepower and up to 6% better fuel consumption than the PC210LC-10.

PC210LC-11 Walkaround

Features

Komatsu Auto Idle Shutdown

Komatsu auto idle shutdown automatically shuts the engine down after idling for a set period of time to reduce unnecessary fuel consumption and exhaust emissions. The countdown to engine shutdown can be easily programmed from 5 to 60 minutes.

Fuel Consumption

The Eco-gauge and new fuel consumption gauge are viewed on the right side of the color monitor and assist the operator in maintaining low fuel consumption and environment friendly operation.

Fuel Consumption
Reduced by up to 6%

(vs PC210LC-10 Based on typical work pattern
 Collected via KOMTRAX)


This fuel consumption data is the result of using a prototype machine. 

High Rigidity Work Equipment

Booms and arms are constructed with thick plates of high tensile strength steel. In addition, these structures are designed with large cross sectional areas and large one piece castings in the boom foot, the boom tip, and the arm tip. The result is work equipment that exhibits long term durability and high resistance to bending and torsional stress. A standard HD boom design provides increased strength and reliability.

Switchable Display Modes

The main screen display mode can be changed by pressing the F3 key.

Centralized engine check points

Locations of the engine oil check and filters are integrated into one side to allow easy maintenance and service.

Rear View Monitoring System

A new rear view monitoring system display has a rear view camera image that is continuously displayed together with the gauges and important vehicle information. This enables the operator to carry out work while easily checking the surrounding area.

Specifications

Engine

Model Komatsu SAA6D107E-3*
Type Water-cooled, 4-cycle, direct injection
Aspiration Komatsu Variable Geometry Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 107 mm 4.21''
Stroke 124 mm 4.88''
Piston displacement 6.69 ltr 408 in³
Horsepower:
ISO 9249 / SAE J1349 - Net 122.8 kW 165 HP
Fan at maximum speed - Net 118.6 kW 159 HP
Rated rpm 2000 rpm
Fan drive method for radiator cooling Mechanical with viscous fan clutch
Governor All-speed control, electronic
*EPA Tier 4 Final emissions certified

Hydraulics

Type .........HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves

Number of selectable working modes
6
Main pump:

Type
Variable displacement piston type
Pumps for
Boom, arm, bucket, swing, and travel circuits
Maximum flow 475 ltr/min 125.5 U.S. gal/min
Supply for control circuit
Self-reducing valve
Hydraulic motors:

Travel
2 x axial piston motors with parking brake
Swing
1 x axial piston motor with swing holding brake
Relief valve setting:

Implement circuits 37.3 MPa 380 kgf/cm²
5,400 psi
Travel circuit 37.3 MPa 380 kgf/cm²
5,400 psi
Swing circuit 28.9 MPa 295 kgf/cm²
4,190 psi
Pilot circuit 3.2 MPa 33 kgf/cm²
470 psi
Hydraulic cylinders:

Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 130 mm x 1334 mm x 90 mm 5.1" x 52.5" x 3.5"
Arm / 1 135 mm x 1490 mm x 95 mm 5.3" x 58.7" x 3.7"
Bucket / 1 115 mm x 1120 mm x 80 mm 4.5" x 44.1" x 3.2"

Drives & Brakes

Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 202 kN 20570 kg 45,349 lb
Gradeability 70% 35°
Maximum travel speed: (Auto-Shift)
High 5.5 km/h 3.4 mph
Mid 4.1 km/h 2.5 mph
Low 3.0 km/h 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake

Swing System

Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 12.4 rpm
Swing torque 6900 kg.m 49,907 ft lbs

Undercarriage

Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 49 each side
Number of carrier rollers 2 each side
Number of track rollers 9 each side

Coolant and Lubricant Capacity (refilling)

Fuel tank 400 ltr 105.7 U.S. gal
Coolant 30.7 ltr 8.1 U.S. gal
Engine 23.1 ltr 6.1 U.S. gal
Final drive, each side 5.0 ltr 1.3 U.S. gal
Swing drive 6.5 ltr 1.7 U.S. gal
Hydraulic tank 132 ltr 34.9 U.S. gal
Hydraulic system 234 ltr 61.8 U.S. gal
DEF tank 23.1 ltr 6.1 U.S. gal

Sound Performance

Exterior – ISO 6395  100 dB(A)
Operator – ISO 6396   66 dB(A)

Operating Weight (approximate)

Operating weight includes 5700 mm 18'8" one-piece boom, 2925 mm 9'7" arm, SAE heaped 1.19 m3 1.57 yd3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.

Triple-Grouser Shoes Operating Weight: Ground Pressure
700 mm 28" 24160 kg
53,265 lb
0.47 kg/cm2
6.7 psi
800 mm 31.5' 24440 kg
53,882 lb
0.42 kg/cm2
5.9 psi

Standard

  • 3 Speed travel with Auto shift
  • Alternator, 90 Ampere, 24V
  • AM/FM radio
  • Automatic engine warm-up system
  • Automatic air conditioner/heater
  • Auto idle
  • Auto Idle Shutdown (programmable)
  • Lever lock Auto-lock
  • Auxiliary input (3.5 mm jack)
  • Batteries, large capacity
  • Battery disconnect switch
  • Boom and arm holding valves
  • Carrier rollers (2 each side)
  • Converter, (2) x 12V
  • Counterweight, 4370 kg 9,634 lb
  • Dry type air cleaner, double element
  • Electric horn
  • EMMS monitoring system
  • Engine, Komatsu SAA6D107E-3
  • Extended work equipment grease interval
  • Fan guard structure
  • Fuel system pre-cleaner 10 micron
  • High back air suspension seat, with heat 
  • Hydraulic track adjusters
  • KOMTRAX® Level 5.0
  • Large LCD color monitor, high resolution
  • Lock lever
  • Mirrors, (LH and RH)
  • Operator Protective Top Guard (OPG), Level 1
  • Operator Identification System
  • Pattern change valve (ISO to BH control)
  • Power maximizing system
  • PPC hydraulic control system
  • Pump/engine room partition cover
  • Radiator and oil cooler dustproof net
  • Rear reflectors
  • Rearview monitoring system (1 camera)
  • Revolving frame deck guard
  • Revolving frame undercovers
  • ROPS cab
  • Seat belt, retractable, 76 mm 3"
  • Seat belt indicator
  • Secondary engine shutoff switch
  • Service valve
  • Shoes, triple grouser, 800 mm 31.5"
  • Skylight
  • Slip resistant foot plates
  • Starter motor, 5.5kW/24V x 1
  • Suction fan
  • Thermal and fan guards
  • Track frame undercover
  • Track frame swivel guard
  • Travel alarm
  • Working lights, 2 (boom and RH front)
  • Working mode selection system

Optional

  • (1) additional rearview camera
  • Arms
    – 2925 mm 9'7" HD arm assembly

    – 2925 mm 9'7" HD arm assembly with piping
  • Booms
    – 5700 mm 18'8" boom assembly

    – 5700 mm 18'8" HD boom assembly with piping
  • Cab guards
    – Full front guard, OPG Level 1

    – Full front guard, OPG Level 2

    – Bolt-on top guard, OPG Level 2

    – Lower front window guard
  • High pressure in-line hydraulic filters
  • Hydraulic control unit, 1 actuator
  • Rain visor
  • Revolving frame undercovers, heavy duty
  • Shoes, triple grouser, 700 mm 28"
  • Sun visor
  • Straight travel pedal
  • Track roller guards, full length
  • Working light, front, one additional