• 440,920 - 450,000 lbs Operating Weight
  • 956 @1800 rpm Horsepower
  • 15.7 - 17.9 yd³ Bucket Capacity

PC2000-8

Komatsu’s “Operator First” design concept is exemplified in the PC2000-8. The cab is designed for mining with 30% more cab volume, a full front window with two wipers, OPG level 2 top cab guard, extensive exterior lighting, a 7” LCD color monitor with Eco-gauge and an air suspension seat. The operator can tailor his machine performance using the Economy, Power or Heavy Lift modes for maximizing efficiency.

Features

Komatsu Technology

Powerful and Fuel Efficient Machine Achieved by Total Power Management PC2000-8 is equipped with the new Komatsu SAA12V140E engine that features clean, fuel efficient, and powerful performance. Power losses in hydraulic system, cooling fan, and PTO are reduced. Total Power Management using On-demand Power Control System succeeds in drastically reducing the fuel consumption per hour. The machine has enhanced functions that contribute to energy-saving operation including adjustable ‘E mode’ and ‘Eco-gauge’. The PC2000-8 is a new generation, clean, and economical machine.

High Power Komatsu Engine

713 kW (956 HP) Equipped with a high efficiency turbocharger with large air-to-air aftercooler, the engine delivers high output of 713 kW 956 HP. The ample engine power enables an increase in work efficiency. The clean engine is EPA Tier 2 emissions certified.

Heavy Lift Mode

Turning the heavy lift mode switch on activates the all-out power delivery system to increase the lifting force of the boom. This mode is beneficial when handling rock and during heavy lifting applications.

Selectable Working Modes

Two established work modes are further improved. You can select Power or Economy modes using a one-touch operation on the monitor panel. Two E-mode settings available, enabling the operator to select the mode that delivers the best combination of production and fuel efficiency for the working conditions.

Eco-gauge

The Eco-gauge is provided on the right side of the monitor screen for energy saving operation. The gauge informs the operator of cumulative achievement to a predetermined fuel consumption target. By keeping the gauge indication within the green range, the operator can perform fuelefficient operation to meet the target value.

Power Module Packaging for Easy Installation and Removal of Components

Engine, radiator, oil cooler, hydraulic pumps, and PTO are packaged within the Power module. This design facilitates installation and removal of components, contributing to the reduction of maintenance, transportation, and overhaul hours.

 

Strengthened Frame Structure

Revolving frame, center frame, and crawler frame are strengthened completely. The frames endure heavy-duty work and exhibit excellent durability.

Durable Swing Circle with Triple-Roller Bearing

Large capacity triple-roller bearing is used for the swing circle. The swing circle endures heavy-duty excavating and loading work, and exhibits excellent durability.

Sturdy Guard/Large Track Link

Travel motors are shielded by sturdy guards. They prevent the motors from being damaged by the thrust of rocks. Enlarged track rollers, in combination with the largest track links, provide excellent durability.

Monitor Function

Controller monitors engine oil level, coolant temperature, battery charge, air clogging, etc. If controller senses any abnormality, it is displayed on the LCD.

Maintenance Function

Monitor indicates replacement time of oil and filters on LCD and warns the operator when service is due.

Automatic Greasing System

Greasing of the work equipment and bucket is fully automated. Greasing is hassle-free since the system carries out automatic greasing at regular time intervals.

Excellent Operational Visibility

Downward visibility is greatly improved by the extended front windshield offering the operator a better view of machine footing. The new interior arrangement, in combination with wide glass windows, improves visibility on the work equipment side and provides excellent visibility of the surroundings.

 

New Operator Cab Specially Designed for Mining

New operator cab provides a comfortable working environment. Sturdy cab of solid construction, with integrated top guard conforming to OPG level 2.

Engine Stop Devices & Fuel Cut-Off Lever

Engine stop devices are provided at two points on the power module as standard equipment. Engine start lock function of the switch is used during maintenance work. In addition, a fuel cut- off lever provided on the revolving frame allows stopping the engine from the ground.

 

Rearview Monitoring System (optional)

Up to three video cameras can be installed to monitor the rear of the machine (full-screen or split- screen display selectable).

Comfortable Operating Environment with Same

Level of Low Noise as Passenger Cars Integral structure of cab and new damper mounts, in combination with power module packaging, attain outstanding low noise and vibration in the cab, equivalent to passenger cars.

Large 7-inch TFT-LCD Monitor

The machine is equipped with a large 7-inch TFT-LCD monitor. Panel visibility is significantly improved by the use of the high-resolution TFT-LCD panel. The panel switch group is easy-to-use, enabling switch over of engine output and increase of lifting force during operation. Furthermore, use of function key enables the operator to perform multi-functions with ease. Character display can be selected among nine languages.

Specifications

Engine

Model Komatsu SAA12V140E-3
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled
Number of cylinders 12
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 1860 in³ 30.48 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 - Gross 976 HP 728 kW
ISO 9249 / SAE J1349 - Net 956 HP 713 kW
Hydraulic fan at maximum speed 910 HP 679 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic

Hydraulic System

Type Open-center load sensing system
Number of selectable working modes 2
Main pump:
Type Variable displacement piston pumps
Pumps for Boom, arm, bucket, swing and travel circuits
Maximum flow:
For attachment, swing and travel 612.2 U.S. gpm 2317 ltr/min
For fan drive 85.6 U.S. gpm 324 ltr/min
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Fan 2 x axial piston motors
Relief valve setting:
Attachment circuits:
Backhoe 4,270 psi 29.4 MPa 300 kgf/cm2
Loading shovel 4,270 psi 29.4 MPa 300 kgf/cm2
Travel circuit 4,760 psi 32.9 MPa 335 kgf/cm2
Swing circuit 4,270 psi 29.4 MPa 300 kgf/cm2
Pilot circuit 430 psi 2.9 MPa 30 kgf/cm2
Hydraulic cylinders:
Number of cylinders Bore x Stroke Bore x Stroke
Backhoe:
Boom / 2 11.8" x 104.2" 300 mm x 2647 mm
Arm / 2 9.8" x 84.2" 250 mm x 2138 mm
Bucket 7.9" x 85.4" 200 mm x 2170 mm
Loading shovel:
Boom / 2 11.0" x 76.0" 280 mm x 1930 mm
Arm / 2 7.9" x 85.4" 200 mm x 2170 mm
Bucket / 2 8.9" x 80.7" 225 mm x 2050 mm
Bottom dump / 2 7.1" x 23.6" 180 mm x 600 mm

Drive System

Travel gearPlanetary gear
Gradeability65%
Maximum travel speed1.7 mph2.7 km/h
Parking brakesMechanical disc brakes

Swing System

Swing gear2 x Planetary gear
Swing circle lubricationGrease
Swing holding brakesMechanical disc brakes
Swing speed4.8 rpm

Undercarriage

Track adjusterGrease
No. of shoes49 each side
No. of carrier rollers3 each side
No. of track rollers8 each side

Coolant and Lubricant Capacity (Refilling)

Fuel tank898.3 U.S. gal3400 ltr
Radiator47.6 U.S. gal180 ltr
Engine31.7 U.S. gal120 ltr
Travel gear, each side22.5 U.S. gal85 ltr
Swing drive7.9 x 2 U.S. gal30 x 2 ltr
Hydraulic tank343.5 U.S. gal1300 ltr
PTO7.9 U.S. gal30 ltr

Standard

ENGINE AND RELATED ITEMS:

  • Air cleaner, double element dry (Inside mounted)
  • Two cooling fans with fan guard (Hydraulic drive, for radiator and oil cooler)
  • Engine, Komatsu SAA12V140E-3
  • Fuel pre-filters with water separators
  • Corrosion resistors 

ELECTRICAL SYSTEM:

  • Alternators, 2 x 90 amp, 24V
  • Batteries, 140 Ah, 4 x 12V
  • Starting motors, 2 x 11 kW
  • Working lights, 4 boom, 4 cab base, 3 fuel tank top front, 1 left front and 1 left under cab side catwalk
  • Auto decelerator and auto idling system
  • AM/FM radio
  • Lighted switches on instrument panel

UNDERCARRIAGE:

  • 810 mm / 32" double grouser shoes
  • 8 track rollers / 3 carrier rollers (each side)
  • Hydraulic idler cushion (HIC) with shock absorbing accumulator
  • Track guiding guard (Separate type)

GUARDS AND COVERS:

  • Dustproof net for radiator and oil cooler
  • Pump/engine room partition cover
  • Power module under cover
  • Travel motor guard

OPERATOR'S CAB:

  • Large damper mounted and pressurized mining shovel cab with large tinted windshield, lockable door, large twin wipers and washers, floor mats, cigarette lighter, ashtray and cup holders
  • Instrument panel with electronic display/monitor system (7"-TFTLCD), electrically-controlled throttle dial, electric service meter, gauges (coolant temperature, hydraulic oil temp., fuel level, PTO oil temp., engine oil temp.), truck counters, eco-gauge
  • Built-in top guard conforming to OPG level 2 (ISO)
  • Automatic air conditioners (twin)
  • Seat, fully adjustable air suspension with retractable seat belt
  • Trainer's seat
  • Sun shield
  • Fire extinguisher 

HYDRAULIC SYSTEM:

  • EOLSS (Electric Open Center Load Sensing System)
  • 4 variable displacement piston pumps (2 tandem pumps) for work equipment, travel and swing, 2 variable displacement piston pumps (1 tandem pump) for fan drive
  • Two axial piston motors for swing with single stage relief valve
  • One axial piston motor per track for travel with counterbalance valve
  • Four control valves (two integrated valves) for work equipment, swing and travel
  • Control levers for work equipment and swing with PPC system
  • Control levers and pedals for travel with PPC system
  • Oil cooler
  • High-pressure in-line oil filters
  • Drain-filters for pumps & motors
  • Shockless boom control
  • Two-mode pressure setting for boom

DRIVE SYSTEM:

  • Planetary travel gear with axial piston motor
  • Travel parking brake

OTHER STANDARD EQUIPMENT:

  • Fully-automatic greasing system with 200 liter 52.8 U.S. gal.
  • Manual grease gun for track adjuster
  • Fixed emergency escape ladder
  • Fully hydraulic ladder
  • Fuel tank, 3400 liter 898 U.S. gal.
  • Automatic swing holding brake
  • Emergency engine stop switch and fuel shut-off lever
  • Maintenance light for night
  • Step light with timer
  • Light in machine cab
  • Travel alarm
  • Wide catwalk and large handrail
  • Interconnected horn and flashing light
  • Dual rearview mirrors
  • VHMS (with Orbcomm)

Optional

Arms (Backhoe):

  • 3900 mm 12'10'' arm assembly

Arms (Loading shovel):

  • 4450 mm 14'7'' arm assembly

Booms (Backhoe):

  • 8700 mm 28'7'' boom assembly

Other:

  • HID lamp system
  • Rearview monitoring system
  • Cab front guard
  • PM tune-up service connection
  • Track shoe, 1010 mm 40' triple grouser
  • Center frame under cover 
  • Grease refill system (Wiggins)
  • Fuel quick charge system (Wiggins)
  • Heavy-duty rock bucket
  • 55°C / 131°F spec.
  • Additional filter system for poor-quality fuel
  • Additional pre-cleaner for engine air filter (Enginaire)
  • Full length track guiding guards