• 7,993 - 8,324 lbs Operating Weight
  • 24.4 @ 2200 rpm Horsepower
  • 0.07 - 0.24 yd¬≥ Bucket Capacity

PC35MR-5

What weighs 7,993 lbs., has a powerful Tier 4 final engine, a swinging boom to dig right next to buildings and a blade to backfill after itself? The Komatsu PC35MR-5 of course. Built with the durability of bigger Komatsu excavators, the PC35MR-5 is a powerhouse in a compact package.

PC35MR-5 Walkaround

FEATURES

New Engine Technologies

The PC35MR-5 is equipped with a clean engine that complies with the EPA Tier 4 Final emission regulations. The engine uses proven environment friendly technologies such as an exhaust gas aftertreatment system, an electronically-controlled cooled Exhaust Gas Recirculation (EGR) system, and an optimum fuel injection system using a common rail. These technologies, combined with Komatsu’s own electronic control system, minimize environmental impact and improve fuel economy.


Electronic Control System

The engine and hydraulic system are optimally controlled according to the operating conditions. The hydraulic loss reductions also help reduce both fuel consumption and environmental impact.

Fuel consumption


Reduced Up To 5% Fuel consumption


Comparison with Komatsu’s prior models

The average working pattern is analyzed by KOMTRAX. The above data may differ from actual fuel consumption depending on the type of work. The fuel consumption data is based on in-house comparison test results.

Multi-Function Monitor

Various alerts and machine information are displayed in a simple format. Useful information such as operation records, machine setting and maintenance data are also provided. The operator can easily switch screens.

Minimum Swing Radius

The extra-small swing radius with near zero rear protrusion from the tracks allows the operator to concentrate on work in confined areas.

Enhanced Working Environment

  • Mid back, suspension operator seat
  • Integrated ROPS cab design (ISO 3741:2008)
  • Cab meets ISO Level 1 Operator Protective Guard (OPG) top guard (ISO 10262)
  • Two post canopy or optional ROPS cab
  • Standard control pattern changer

Efficient and Effective Maintenance

Large service compartment doors and tilting cab platform provide simplified daily inspection and maintenance. Large engine and cooler compartment doors simplify daily inspection and periodic maintenance activities. The operator platform tilts forward providing unimpeded access to hydraulic and engine components for maintenance or repair work.

Specifications

Engine

Model Komatsu 3D88E-7*
Type Water-cooled, direct injection
Number of cylinders    3
Bore 88 mm 3.46"
Stroke 90 mm
3.54"
Piston displacement 1.642 ltr
100.2 in³
Horsepower:
SAE J1995 - Gross 18.2 kW 24.4 HP
ISO 9249 / SAE J1349 - Net 18.2 kW 24.4 HP
Rated rpm

2200
Fan drive method for radiator cooling   Mechanical
*EPA Tier 4 Final emissions certified    

Hydraulics

Number of selectable
working modes
  2
Main pumps:
   
Pumps for
  Boom, arm, bucket, and travel circuits
Type
  Variable displacement piston x 2
Maximum flow
32 ltr/min
18.3 gal/min
Pumps for
  Swing and blade
Type
  Gear x 2
Swing pump maximum flow
18.7 ltr/min
4.9 gal/min
Swing pressure maximum
20.1 MPa
2,915 psi
Blade pump maximum flow
9.9 ltr/min
2.61 gal/min
Blade pressure maximum
21.5 MPa
3,118 psi
Max auxiliary flow rate
at 20.5 MPa / 2,973 psi
50 Lpm
13.2 gpm
Hydraulic valve
  8 spool
Operating method

Hydraulic assist
Travel motor:
   
Type
  Variable displacement piston x 2
(with counterbalance valve and travel shaft brake)
Swing motor:
   
Type
Fixed displacement piston type x 1
(with brake valve and swing shaft brake)
Hydraulic cylinders:
(number of cylinders)

bore x stroke x rod diameter
Boom (1)

80 mm x 585 mm x 45 mm
3.14" x 23.0" x 1.77"
Arm (1)

75 mm x 595 mm x 45 mm
2.9" x 23.4" x 1.77"
Bucket (1)

65 mm x 490 mm x 40 mm
2.55" x 19.29" x 1.57"
Boom swing (1)

95 mm x 482 mm x 50 mm
3.74" x 18.97" x 1.97"
Blade (1)

95 mm x 140 mm x 45 mm
3.74" x 5.51" x 1.77"

Drives and Brakes

Steering control
  Two levers with pedals
Drive method   Hydrostatic
Gradeability   30°
Maximum travel speed (rubber):
(Auto-shift)

High 4.6 km/h 2.85 mph
Low 2.6 km/h 1.61 mph
Service brake   Hydraulic lock
Parking brake   Mechanical disc
Maximum drawbar pull 33 kN 3400 kgf 7,495 lbf

Undercarriage

Center frame X-frame
Track frame Box-section
Track type Sealed
Track adjuster Greased gun
Number of carrier rollers (each side) 1
Number of track rollers (each side) 4

Coolant & Lubricant Capacity (refilling)

Engine 6.7 ltr 1.77 U.S. gal
Hydraulic system 20 ltr 5.3 U.S. gal
Cooling system 3.3 ltr 0.87 U.S. gal
Fuel tank 41 ltr
10.8 U.S. gal
Final drive (each side) 0.6 ltr
0.15 U.S. gal

Operating Weight (approximate)

With ROPS Canopy, Rubber Shoe
   
Operating Weight
3625 kg
7,993 lb
Ground Pressure
35.9 kPa
5.20 psi
With ROPS Cab, Rubber Shoe


Operating Weight
3775 kg
8,324 lb
Ground Pressure 37.3 kPa
5.4 psi

Blade

Width x height 1740 mm x 355 mm 5'9" x 1'2"

Standard

ENGINE

  • Air cleaner, double element with auto dust evacuator
  • Cooling fan, suction type

ELECTRICAL SYSTEM

  • Alternator, 12 V/55 A
  • Auto-decelerator
  • Battery, 1 x 12 V/58 Ah
  • Front travel light
  • Starting motor 12 V/1.7 kW
  • Working light on boom

HYDRAULIC SYSTEM

  • Auxiliary hydraulics with one-way/two-way flow selector valve
  • Foot control for auxiliary hydraulics
  • ISO/SAE pattern change valve

GUARDS AND COVERS

  • Fan guard
  • Thermal guard

UNDERCARRIAGE

  • Shoe, 300 mm 12" rubber shoe

OPERATOR ENVIRONMENT

  • 12 V x 1 power supply
  • Automatic two-speed travel control
  • High resolution 3.5” LCD color monitor
  • Lock lever auto lock function
  • Rear view mirrors (RH, LH)
  • Retractable seat belt, 78 mm 3"
  • Suspension seat
  • Travel alarm
  • Two-post ROPS (ISO 3471) canopy

WORK EQUIPMENT

  • Arms 1720 mm 67.7" arm assembly with piping
  • Backfill blade
  • Booms — 2540 mm 100" boom assembly with piping (PC35MR-5)

OTHER EQUIPMENT

  • Auto idle shutdown
  • KOMTRAX®
  • Quick release buttery terminal (-)
  • Swing holding brake
  • Counterweight — 650 kg 1,433 lb                                               

Optional

UNDERCARRIAGE

  • Road Liner track, 300 mm 12"
  • Steel track, 300 mm 12"

OPERATOR ENVIRONMENT

  • Cab with A/C, radio ready, auxiliary input (3.5 mm jack) ready
  • Proportional joysticks

WORK EQUIPMENT

  • Buckets
    — 300 mm
    12" HD bucket
    — 457 mm
    18" HD bucket
    — 610 mm
    24" HD bucket
  • Hydraulic thumb
  • Mechanical quick coupler